Ampwave Premade Tech
Make your Ampwave come to life with little soldering or coding skills needed!
Main face Specs:
2.0 MAX7219 Inner Ultimate frame(flat or Tactical)
FurBitten Studios/Caw Labs custom PCBs
Control board, boop sensor, mic, and max7219 pcbs
9 vibrant colors to choose from
Ampwave Style Cheek Caps
8 custom expressions
Boop Sensor
Sniffer Feature
Dizzy and Idle Feature
Blinking eye animations
Live mic animations
Manual mic on/off control
Large live data hud
Rave mode
Calibration mode
Game mode - 6 playable games
Speakers/Cheek caps:
Two 2inch 4Ohm 10w speakers
Bluetooth board- Installed into inner cap
All needed cables
Premade set ups will come to you fully installed into the inner frame, completely wired up, and with your custom code uploaded. Just bolt in and you're ready to go!
NOTE: Due to how the speakers go in and the cable running through the back of the helmet you will need to solder the wires to the speakers. This is covered in my guide!
Board power cable and 13mm button (for expression changing) is included
EXPRESSIONS You have 2 options for making your expression template. You may use my PSD file or use CawLabs Protogen Face builder. Link to PSD Template: Ultimate Face Template
CawLabs: Protogen Face Builder
Information about how to use CawLabs builder can be found here: DIY Guide, Section 3
Please upload your expression as a PNG file
ADDITIONAL INFORMATION
The premade electronics are only compatible with FurBitten Studios 2.0 Helmets found here in my shop. Compatible with all visor types as well. There is no functional difference between the flat and tactical max frame; only a cosmetic difference.
Need something custom?
If your Ampwave does not have a single color face you may email me at production@furbittenstudios.com for a custom kit quote. Please know that I cannot offer RBG MAX7219s but if your Ampwave build needs a kit with different color eye(s) or maybe a half and half color setup that can be accommodated. When emailing for a custom quote please include artwork of the characters face at minimum showing the left and right side of the face.
More designs/items are in the works! If you have an idea for an Item or kit part in general please consider telling me via email. Community ideas are welcomed and encouraged to further expand the options for your future cyber fursuit builds!
Please check your email within 24 hours of placing your order to see if FurBitten Studios has reached out with any questions or concerns about your order. You may need to check your spam folder!