Pathfinder Protogen Kit
This listing is for a preset design of FurBitten Studios Pathfinder helmet frame. Please read the full description!
WARNING! WARNING! WARNING!
Protogen Helmets are NOT protection gear of any kind and should not be used for such purposes. Protogen Helmets are costume pieces only and should be handled with care.
Upgrade parts are not permitted in this product, please see the “Base Helmet Design Your Own” listing for a customized kit.The individual parts of the Pathfinder kit will be available in the upgrade listings for the “Build your own” kits soon with other new items as well.
_________________________
Easy check out for those wanting the Pathfinder Protogen helmet!
Helmet Kit includes:
1 Overband 3-A
1 pair of Antenna - A2
1 Jaw plate
1 pair of fins - Shape 24
1 pair of Y-Wing cheek hubs
Optional add-on: Full Helmet backing
Part Specs:
Overband 3-A:
5 holes for magnets ( 6mm X 2mm)
Compatible with all visor shapes
4 Peg slots for helmet backing alignment
Groove for Antenna alignment
Jaw Plate:
4 holes for magnets (6mm x 2mm)
Slot for a 40mm fan
3 large vent holes
Y-Wing Cheek Hubs (pair)
Comes with 4 thread inserts already installed per cheek. 2 for the inner cheek cap and 2 for the electronics frame. (8 total per pair)
Inner tab for cheek screen alignment (clear plastic blanks will be provided)
Bag of M4 bolts and hex key tool will be provided
Would you like a button hole added to the left cheek hub?
If desired a 13mm hole can be placed on the left cheek hub at your request. This button hole is where FurBitten Studios mounts their button for expression changing. The button itself is not included. Please be sure to note if you want the button hole. If you do not leave a note then NO button hole will be added. The button hole is at NO additional cost to you and is entirely optional.
The Pathfinder Protogen helmet kit is compatible with all visor shapes and electronics frames; sold separately!
Finish Types
Raw Kit:
The raw kit option is bare 3D printed parts with zero post processing whatsoever. Small sanding marks or filler may be seen in your raw kit to correct small surface imperfections.
Part Sanding:
This service is the heavy sanding of visible helmet parts only. The jawplate, cheeks, fins (if applicable), and overband. Items that are not typically seen or will be covered will not receive sanding such as the inner helmet areas and helmet backing.
The heavy sanding is not a final surface finish but is the removal of the heavier layer lines. If you do not possess sanding tools further refinement by hand will be much easier with this service.
Part Sanding w/assembly:
If you want even more help I am offering to not only sand the parts but plastic welding of them as well, providing you with an assembled frame ready for final refinement.
This service included the sanding, welding, and blending of the welds. As with the Part Sanding option, the sanding an weld blending is not a final finish
Plastic welding is not the required way to assemble helmets but it is just how FurBitten Studios does it. You may just glue the parts together if you'd like.
__________________
Please check your email within 24 hours of placing your order to see if FurBitten Studios has reached out with any questions or concerns about your order. You may need to check your spam folder!