Ampwave/Screenwave Helmet Kit

THIS IS A PREODER! 
 
The DIY guide for my ampwave/screenwave helmets will be public on my website before helmets go out. This preoder will be open till September 19th,2026. As orders come in I will be working on them. Expect all preorders to be sent out by mid October 2026.
___________
Please read the description of this product carefully!
 
As FurBitten Studios grows the kit part selection some parts may not be compatible with other kit parts. Any incompatibilities of parts will be listed below:
 
Protogen horns
Protogen ears
Primary Protogen Helmet Fins
Overband Upgrades- Armored overband
Cheek Hub Upgrades- Tactical Cheek
Premade Protogen Face
 
This listing will include the tinted visor! You do not need to purchase the K9 visor separately. Tech is a separate listing however. Please See "Ampwave/Screenwave Premade Tech"

The stand alone tech frames do work in the ampwave/screenwave, should you wish to build your own. The speaker and bluetooth board will not be sold seprately at this time.
 
All parts are 3D printed in PETG
 
WARNING! WARNING! WARNING! 
Ampwave/Screenwave Helmets are NOT protection gear of any kind and should not be used for such purposes. Ampwave/Screenwave Helmets are costume pieces only and should be handled with care.
 
___________________
 
Your Ampwave/Screenwave Helmet kit will include the following items:
 
1 Standard Overband
1 pair of Ears and Ear Covers
1 Set of faux Speakers (2 small and 2 large)
1 Jaw Plate
1 pair of standard flair fin cheek hubs
1 pair of square flair fins
1 pair of cheek center pieces
1 full helmet backing (3 pieces)
1 Tinted K9 Visor
 
Part Specs:
 
Standard overband:
 
5 holes for magnets ( 6mm X 2mm)
Compatible with all visor shapes
4 Peg slots for helmet backing alignment
 
Jaw Plate:
 
4 holes for magnets (6mm x 2mm)
Slot for a 40mm fan 
3 large vent holes
 
Standard Round Cheek Hubs w/flair (pair)
 
Comes with 4 thread inserts already installed per cheek. 2 for the inner cheek cap and 2 for the electronics frame. (8 total per pair)
Inner tab for center cheek piece alignment 
Bag of M4 bolts and hex key tool will be provided 
 
Would you like a button hole added to the left cheek hub?
 
If desired a 13mm hole can be placed on the left cheek hub at your request. This button hole is where FurBitten Studios mounts their button for expression changing. The button itself is not included with this listing. Please be sure to note if you want the button hole. If you do not leave a note then NO button hole will be added. The button hole is at NO additional cost to you and is entirely optional.
 
Finish Types
 
Raw Kit:
The raw kit option is bare 3D printed parts with zero post processing whatsoever. Small sanding marks or filler may be seen in your raw kit to correct small surface imperfections.
 
Part Sanding:
This service is the heavy sanding of visible helmet parts only. The jawplate, cheeks, flair fins, ears, and overband. Items that are not typically seen or will be covered will not receive sanding such as the inner helmet areas and helmet backing.
 
The heavy sanding is not a final surface finish but is the removal of the heavier layer lines. If you do not possess sanding tools further refinement by hand will be much easier with this service.
 
Part Sanding w/assembly:
If you want even more help I am offering to not only sand the parts but plastic welding of them as well, providing you with an assembled frame ready for final refinement. 
 
This service included the sanding, welding, and blending of the welds. As with the Part Sanding option, the sanding an weld blending is not a final finish. 

These parts will not be attached with this service to allow for easier painting or due to tech assembly needed- Faux speakers, Ear covers, Cheek center pieces.
 
Plastic welding is not the required way to assemble helmets but it is just how FurBitten Studios does it. You may just glue the parts together if you'd like.
 
_________________
 
Please check your email within 24 hours of placing your order to see if FurBitten Studios has reached out with any questions or concerns about your order. You may need to check your spam folder!